5 Uses For

Undergoung Utilities and their Standard Colors

Underground utilities can easily be identified today. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. It is to prevent disaster. The worst thing that can happen if lines are not identified is that fatal injuries can happen. Services in the area where the lines are located can experience interruption. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. When the number is called, you can let the utility companies come out and mark their respective lines.

Marking lines may lessen the risks but there are time when accidents still happen. Utility lines are struck every 6 minutes, some place. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. When locating utility lines underground, this machine makes it easy to do so. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

It is easier to identify underground utility lines today because they now use different colors for each utility. The colors below indicate the kind of utility uses it.

If you see white lines, then these are proposed excavation sites. It locates areas that will be excavated in the near future.

Temporary survey markings use pink lines. Legal property boundaries are marked off by these pink lines.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is associated with fire and danger so it is just appropriate to use it for electrical works.

If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Lines for potable water use blue lines. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Sewer and drain lines use the color green. A project can be derailed for a long time when these utility lines are hit.

If you want to learn more about utility lines click here now! View here for more.